Signal Cable Length And Preamplifier - JUMO flowTRANS MAG S Series Safety Manual

2 Device versions
2.5.3

Signal cable length and preamplifier

For devices in the remote mount design, the electrical connection between the transmitter and sensor is
made via a signal cable.
Transmitter housing
design
Maximum signal cable
a
length
Without preamplifier
With preamplifier
Scope of delivery
Signal cable, part no.
Transmitter housing
design
Maximum signal cable
a
length
Without preamplifier
With preamplifier
Scope of delivery
Signal cable, part no.
Transmitter housing
design
Maximum signal cable
a
length
Without preamplifier
With preamplifier
Scope of delivery
Signal cable, part no.
a
At a minimum conductivity for the measurement medium of ≥ 5 µS/cm
12
Single-compartment
housing
50 m (164 ft)
200 m (656 ft)
5 m (16.4 ft) included
00648906
Single-compartment
housing
50 m (164 ft)
-
5 m (16.4 ft) included
00648906
Dual-compartment
housing
10 m (164 ft)
-
10 m (32.8 ft)
fixed installation
00648907
Ex-zone 2
outside the Ex-area
Ex-zone 1
outside the Ex-area
Ex-zone 1
Ex-zone 2 or
406018/2-0
406018/2-1
406019/2-0
406019/2-1
Ex-zone 2 or
406018/2-0
406018/2-1
406019/2-0
406019/2-1