Overload Capability - Siemens SINAMICS S120 Manual

Air-cooled chassis power units
Hide thumbs Also See for SINAMICS S120:
Table of Contents

Advertisement

Line Modules
5.5 Active Line Modules Chassis-2
Article number
Recommended AC fuse acc. to IEC
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Recommended DC fuse acc. to IEC
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Recommended AC fuses according to UL
- Rated current
Recommended DC fuses according to UL
Type 3NB1/3NB2
- Rated current
Minimum short-circuit current
Derating for higher pulse frequencies on request.
1)
The maximum DC link capacitances of the drive line-up are specified as a function of the number of precharging resistors
2)
(2.2 Ω) connected in parallel per phase: 1 precharging resistor/2 precharging resistors/3 precharging resistors.
The specified power loss is the maximum value at 100 % utilization. The value in normal operation is lower.
3)
The cable lengths are valid for use in IT systems. When used in TN systems, the cable lengths are shortened to 30 % of
4)
the specified value.
When used in TN systems and during operation of the Active Line Module Chassis-2 or the connected Motor Module with
5)
increased pulse frequency, you can obtain the permitted cable lengths on request.
It is mandatory that the specified fuses are used to achieve a UL-approved system.
6)
Minimum current required for reliable triggering of the designated protective devices.
7)
When using fuses connected in parallel in each phase, all of the fuses must be replaced if one fuse trips.
8)
5.5.8.2

Overload capability

The Active Line Modules Chassis-2 provide an overload reserve.
The criterion for overload is that the Active Line Module is operated as a maximum with its
base load current before and after the overload occurs.
For the specified load cycles, it is possible that the applicable derating factors must be taken
into consideration (for example, pulse frequency, ambient temperature).
250
6SL3331– 7TE41–3AA0
A
A
6)
A
6)
A
kA
7)
7TE41–4AA0
3NE1448-2
3NE1448-2
2
2
8)
8)
850
850
3
3
3NE3338-8
3NC3341-1U
2
2
8)
8)
800
1000
2
3
3NB3358-
3NB3358-
1KK26
1KK26
1700
1700
3NB2357-
3NB2364-
4KK16
4KK17
1600
2100
30
30
Equipment Manual, 06/2020, 6SL3097-5AE00-0BP3
Air-cooled chassis power units

Advertisement

Table of Contents
loading

Table of Contents