Description Of Ati2 Output - ZyXEL Communications U-336S User Manual

Command Options Function & Description
T
UPX
Vn
V0
V1 *
Xn n=0-7
5 *
Zn n=0-4
Zn
Z4
$
&$
*$

Description of ATI2 Output:

The Link Status Report output appears as follows:
ZyXEL MODEMS LINK STATUS REPORT
Chars Sent
Octets Sent
Blocks Sent
Ton dial
Download firmware to the Flash
EPROM by using Xmodem protocol
Sets display type for Result Codes
Display result code in numeric form.
(See also S35.7 and the result code
table of 'ATXn')
Display result code in verbose form.
Result code options, see the Options
Table
Reset modem and set power-on
profile.
Reset modem and load user profile n
(0-3).
Reset modem and load factory
settings.
Basic command summary help
Extended 'AT&' command summary
help
Extended 'AT*' command summary
help
0 Chars Received
0 Octets Received
0 Blocks Received
AT Command Set Summaries 91
Ref.
S23.1
S23.6
S23.3-5
S15.5-7
0
0
0