Dial Memory
The first menu in the dialing directory is DIAL MEMORY. Pressing the
ENTER key will display the following screen:
z #00:12345
<< >> SELECT MEMORY
Equivalent AT Commands:
AT&Z?
ATDSn
The first stored number shown on the menu is the default dial number
which can be selected from the DEFAULT DIAL menu. By pressing
the left or right arrow key, you can view up to 50 different numbers
stored in the memory. Pressing the ENTER key will cause the selected
number to be dialed. The first line of the LCD can display up to 16
characters. However, up to 25 characters can be entered. Characters
17 through 25 are displayed on the second line of the LCD display.
Storing a Number
Pressing the right arrow key from the DIAL MEMORY display will
move the menu to STORE NUMBER. Pressing the ENTER key at this
point will produce the following screen display:
z #00: 12345
<< >> SELECT MEMORY
Changing an existing number:
z #00:1234567
<< >> SELECT MEMORY
32 LCD Panel Operation
<ENTER>
View all stored phone numbers.
n = 0 - 49; dial stored number.
<ENTER> z #00:
<< >> SELECT DIGIT
<ENTER> z #00:
<< >> SELECT DIGIT
Dial out the number