ZyXEL Communications U-336S User Manual page 116

Command Options Function & Description
*In
*Mn
*Pn
*Qn
*Rab
*Sn
*T
102 AT Command Set Summaries
Command set selection
*I0 * AT command set
*I1 V.25bis command set
*I2 Dumb mode
Leased line auto-handshake mode
selection
*M0 Set to Originate mode
*M1 Set to Answer mode
n=0-15 Set leased line transmission power
*P9 * level; ranges from 0 dBm to -15 dBm
(default: -9 dBm) (see also S35.3)
Action taken when line quality
changes.
*Q0 No action to poor signal quality.
*Q1 Retrain action taken if signal quality is
poor. (See also S41.2)
*Q2 * Adaptive rate, automatic fall-back or
forward.
*Q3 Disconnect if signal quality is poor.
Read remote profile "b" to local user
profile "a"
a=0-3 Local user profile number "a"
b=0-3 Remote user profile number "b"
b=4 Remote active configuration
b=5 Remote factory default configuration
Secondary channel options
*S0 * Secondary channel disabled
*S1 Secondary channel enabled
Recall the last CND (Caller ID)
information.
Ref.
S17.6-7
S14.0
S17.1-4
S27.6-7
S36.1
S37.4-7
S37.0-3
S40.2