ZyXEL Communications U-336S User Manual page 87

Command
All other +F commands are not supported, but the modem will respond
OK. In many cases this means "don't care." See PN 2388 for
command details.
Class 2 Command Responses
Response
+FCFR
+FCIG:"string"
+FCON
+FCSI:"string"
+FDCS:vr,br,wd,l
n,df,ec,bf,st
+FDIS:vr,br,wd,ln
,df,ec,bf,st
+FDTC:vr,br,wd,l
n,df,ec,bf,st
+FET:n
+FHNG:n
+FNSC:"HEX string"
Value Description
n=1 Enable polling.
Value Function and Description
Confirmation .
Report remote ID response CIG.
Facsimile connection response.
Report remote ID response CSI.
Report session parameters response;
refer to +FDCC=.... command.
Report session negotiation parameters
response; refer to +FDCC=....
command.
Report remote capabilities response;
refer to +FDCC=.... command.
Post page message response; refer to the
+FET=n command.
Call termination status response.
n=00 Normal and proper end of connection.
n=10 Transmit error on phase A hang up code.
n=20 Transmit error on phase B hang up code.
n=40 Transmit error on phase C hang up code.
n=50 Transmit error on phase D hang up code.
n=70 Receive error on phase B hang up code.
n=90 Receive error on phase C hang up code.
n=100 Receive error on phase D hang up code.
Report the non-standard facilities
command frame.
Fax Operation 73