ZyXEL Communications U-336S User Manual page 134

Command bit dec hex Function and description
S45=
S46=
S48=
120 Status Registers & Result Codes
speed fixed at 9600 if link speed
is 7200, DTE speed follows link
speed. When selected with &B1,
DTE speed fixed at current rate
when an ARQ connection is
made, when a non-ARQ
connection is made, DTE speed
follows the link speed. (See also
S18)
7 128 80 Enable UK (Australian,
Singapore, Indian, etc.,) type
short-to-short (discontinuous)
ring-back detection.
dec hex Delay during which the CND
0- 0-FF silence detection is disabled, in
255 20 ms units. (See also S46)
dec hex CND silence detection interval
0- 0-FF To process the CND, silence
255 must be detected for the
specified interval, in 20 ms units
bit dec hex Bit-mapped register
0 1 1 Cause CND information to be
reported in raw format
1 2 2 Enable DATA ONLY mode.
Auto-detect
V.34/ZyX/V.32bis/V.22bis/V.2
3/V.21 Bell 103 when
answering. If the connection try
fails, the modem will continuously
recycle the handshaking
procedure until the S7 register
Ref.
+087
+003
+000