Table of Contents
Advertisement
client, select the same Standard Mode that the server side selects. ANSI and ETSI create recommendations
and standards for the telecommunications industry.
FIELD
Service Type
Rate Adaption
Transfer Max Rate (Kbps)
Transfer Min Rate (Kbps)
Hardware Installation and Initial Setup
Service Type: Client
Rate Adaption= Disable
Transfer Max Rate(Kbps)= 2320K
Transfer Min Rate(Kbps)= 144K
Standard Mode= ETSI (ANNEX_B)
Press ENTER to Confirm or ESC to Cancel:
Figure 2-10 Menu 2 — WAN Setup
Table 2-5 Menu 2 — WAN Setup Description
Press [SPACE BAR] and press [ENTER] to select Server
(COE) if your Prestige is acting as a server; select Client
(CPE) if your Prestige is acting as a client.
Press [SPACE BAR] to select Enable (activate) or
Disable (deactivate).
When set to Enable, your Prestige will auto-detect the
optimal single Transfer Rate for your DSL line that falls
between the specified Transfer Max Rate and Transfer
Min Rate fields.
When set to Disable, the Transfer Max Rate field
becomes your transfer rate.
Change the default values in this field, ONLY at the
request of your service provider. The Prestige supports
the following symmetrical multi-rate data transmission
speeds: 144, 200, 208, 272, 392, 400, 528, 776, 784,
1040, 1160, 1168, 1544, 1552, 1736, 2064, 2312 and
2320Kbps.
Press [SPACE BAR] to select a Transfer Max Rate
greater than or equal to the Transfer Min Rate and press
[ENTER] to continue.
Change the default values in this field, ONLY at the
request of your service provider. The Prestige supports
the following symmetrical multi-rate data transmission
speeds: 144, 200, 208, 272, 392, 400, 528, 776, 784,
Prestige 724 G.SHDSL CSU/DSU
Menu 2 - WAN Setup
DESCRIPTION
EXAMPLE
Client
Disable
(default)
2320K
(default)
144K
(default)
2-11
Advertisement
Table of Contents
