ZyXEL Communications U-336S User Manual page 89

Command Value Description
+FBS?
+FCC=vr,br,wd
,ln,df,ec,bf,st
+FCLASS=n
+FCO
+FCQ=<rq>,<t
q>
rq=0
rq=1
rq=2
tq=0
tq=1
tq=2
+FCR=n
n=0
n=1
+FCT=n 0-255 DTE phase C time-out parameter. n=0-
+FDR
mode for phase C data.
Buffer size parameter; read only.
DCE capability parameter. Refer to
+FDCC command in Class 2 for
parameter settings.
Service class selection. Refer to
+FCLASS Class 1 command in previous
section.
DCE response fax connection made.
Copy quality check capability parameter
DCE Receive Copy Quality Checking
disabled.
DCE Receive Copy Quality Checking
enabled.
DCE Receive Copy Quality Correction
enabled.
DCE Transmit Copy Quality Checking
disabled.
DCE Transmit Copy Quality Checking
enabled.
DCE Transmit Copy Quality Correction
enabled.
"Capability to receive" parameter
DCE will not receive message or poll a
remote device.
DCE receives message data or polls a
remote device
255, 1s units.
Receive phase C data command initiates
Fax Operation 75