ZyXEL Communications U-336S User Manual page 86

Command
+FMFR?
+FMINSP=n
+FPHCTO=
+FPTS=n
+FREL=n
+FREV?
+FSPL=n
72 Fax Operation
Value Description
n=0
n=1
n=2
n=3
n=4
n=5
0-255 DTE Phase C response time-out:
<value>
n=1
n=2
n=3
n=4
n=5
n=0
n=1
n=0
Request DCE manufacturer .
Minimum phase C speed parameter:
2400 bps.
4800 bps.
7200 bps.
9600 bps.
12000 bps.
14400 bps.
Determine how long the DCE will wait
for a command after reaching the end of
data when transmitting in Phase C.
<value>=0 to 255; 100 ms units.
Page transfer status
Received page good.
Page bad; retrain requested.
Page good; retrain requested.
Page bad; procedure interrupt
requested.
Page good; procedure interrupt
requested.
Phase C received EOL alignment:
The EOL patterns are bit aligned as
received.
The last received bits of EOL patterns
are byte aligned by the DCE, with
necessary zero fill bits inserted. Refer to
TIA PN-2388 for details.
Request the DCE revision identification.
"Enable polling" command:
Disable polling.