Remote Configuration - ZyXEL Communications U-336S User Manual

Remote Configuration

Remote configuration on the U-336S/SA is provided as a profile by
profile batch mode. When on-line, the remote modem's current
configuration or one of its profiles can be read into one of the local
modem's user profiles. This profile is modified locally and the line can
be disconnected during this time.
Local profile modification is done by loading this profile as the active
settings and then modifying and saving the active settings back to the
profile. Then the connection is reestablished and the profile transmitted
to the remote modem.
Reading a remote profile b into a local profile a is achieved with the
command:
AT*Rab
a=0-3
b=0-3
b=4
b=5
Return the modems to on-line status again. The local modem can
upload (write) its profile to the remote modem's profile and have the
remote modem reset from the new profile. This is done with the
command:
AT*Wab
a=0-3
a=4
a=5
b=0-3
Local user profile number.
Remote user profile number.
Remote active configuration.
Remote factory default.
Local user profile number.
Local active configuration.
Local factory default.
Remote user profile number.
Special Functions 53