Dialing Problems; Data Transfer Problems - ZyXEL Communications U-336S User Manual

3. Check that the DTR LED is ON, and that the AA LED flickers
with each incoming ring. If the LEDs do not respond in this way,
refer to your ZyXEL Modem Reference Manual.
4. Set &D and auto answer, if your modem is not connected to
RS232 or DTR is not ready.
Problem
When you receive a phone call, your modem immediately seizes control
of the telephone line.
Solution
Your modem may be configured for auto-answering. To disable auto-
answer, type ATS0=0 and press Enter with the modem in command
state.

Dialing Problems

Problem
Your modem does not dial calls.
Solutions
Make sure the supplied telephone cable is connected to your
modem's LINE jack and not the PHONE jack.
You are using touch-tone dialing on a line that requires pulse dialing.
Change your communications software to use pulse dialing.

Data Transfer Problems

Problem
You can make a data connection with a remote modem, but encounter
frequent errors during data transfers.
138 Diagnostics & Troubleshooting