Extended S-Registers "Atsn=X - ZyXEL Communications U-336S User Manual

Command Function & Description
S7=
S8=
S9=
S10=
S11=

Extended S-Registers "ATSn=x"

Command bit dec hex Function and description
S13=
S14=
106 Status Registers & Result Codes
register also sets the time-out interval for the
"W" dial modifier to wait for the dial tone. (See
also S41b4)
Set duration, in number of seconds modem
waits for a carrier
Set duration, in seconds, for pause (,) option in
Dial command and pause between command
re-executions for Repeat (>) command
Set duration, in tenths of a second of remote
carrier signal before recognition (Ignored if in
non-FSK or half-duplex operation)
Set duration, in tenths of a second, modem
waits after loss of carrier before hanging up
Set duration and spacing, in milliseconds, of
dialed Touch-Tones
bit dec hex Bit-mapped register
1 2 2 Capture modem manufacturer
information during V.42
handshake, can be displayed at
ATI2 <Last Speed/Protocol>
line if available ('Flash' or '
ZyXEL' stands for ZyXEL
connection)
bit dec hex Bit-mapped register:
0 0 0 Modem auto-handshake on
Originate mode
1 1 Modem auto-handshake on
Answer mode
+Ref.
+060
+002
+006
+007
+070
Ref.
+000
+002
*M0
*M1