ZyXEL Communications U-336S User Manual page 69

There are two kinds of caller information message formats sent by the
phone company.
One is the single message format which includes date, time, and
caller ID
The other is the multiple message format which also includes the
caller name as registered with the phone company.
The command ATS40.2=n is used to enable (n=1) or disable (n=0)
the Caller ID detection function. The default is disabled. Enable it only
when you have this service and want to enable its detection.
: T C
ON
OTE HE
IS NOT EXPECTING IT TO BECOME CONFUSED
C
ALLER
(
SUCH AS
In single message format, the modem will send a ring message to the
terminal as follows:
RING
TIME: <MM-DD hh:mm>
CALLER NUMBER: <CALLER_ID> or CALLER
NAME:<CALLER_NM>
RING
MM is the two-digit month message, DD is the two-digit date message,
hh is the hour and mm is the minute of the time, and CALLER_ID is the
phone number of the caller or CALLER_NM his/her name.
The following is an example of a caller ID message as it might appear
on your screen:
RING
TIME: 04-28 12:30
ID
ALLER MESSAGE MAY CAUSE SOME COMMUNICATION SOFTWARE THAT
ID ,
FEATURE BE SURE YOU ARE USING SOFTWARE THAT SUPPORTS IT
ZFAX).
. I
F YOU PLAN TO USE THE
Special Functions 55