Dialing Messages - ZyXEL Communications U-336S User Manual

Dialing Messages

Dialing will cause the following screen to be displayed on the LCD:
DIALING ......................
1234567
The dialed phone number will be displayed on the second line of the
LCD screen. If the number exceeds 20 digits, only the first 20
digits/characters will be displayed. If the modem's DIAL-UP LINE
jack is not plugged in or not connected, the LCD screen will display the
following:
NO DIAL TONE............
1234567
The modem will then return to the IDLE STATUS screen. If the line is
busy, after three to five seconds, the LCD displays:
BUSY .............................
1234567
The modem will then return to the IDLE STATUS screen. If the phone
company is ringing the remote modem, a RINGING message is sent to
the terminal. Setting S42.6 = 1 will disable this RINGING result code.
If any key interruption occurs (from the terminal or panel) and breaks in
before the connection is made, the screen displays:
ABORT............................
1234567
The modem will then return to the IDLE STATUS screen. If the time
interval depicted in the S7 register expires, and the line is still not
connected, the LCD screen shows:
36 LCD Panel Operation