ZyXEL Communications U-336S User Manual page 91

Command Value Description
+FMI?
+FMM?
+FMR?
+FMS=n
+FNR=rpr,tpr,
idr, nsr
rpr=0
rpr=1
tpr=0
tpr=1
idr=0
idr=1
nsr=0
nsr=1
Request DCE manufacturer identification.
Request DCE model identification.
Request DCE revision identification.
Minimum phase C speed parameter. refer
to +FMINSP Class 2 command in
previos section for parameter settings.
Negotiation message reporting control
parameters:
Receiver parameters are not reported.
+FIS: and +FTC: response reports are
suppressed.
Receiver parameters are reported. +FIS:
and +FTC: response reports are
generated.
Transmitter Parameters are not reported.
+FCS: response reports are suppressed.
(+FCS parameter is still loaded)
Transmitter Parameters are reported.
+FCS: response reports are generated.
ID Strings are not reported. +FTI: +FCI:
and +FPI: response reports are
suppressed.
ID Strings are reported. +FNF:, +FNS:
and +FNC: response reports are
generated.
Non-standard frames are not reported.
+FTI: +FCI: and +FPI: response reports
are suppressed.
Non-standard frames are reported. +FTI:,
+FCI: and +FPI: response reports are
generated.
Fax Operation 77