Extended At* Command Set - ZyXEL Communications U-336S User Manual

Command Options Function & Description
&Yn
&Z?
&Zn=s

Extended AT* Command Set

Command Options Function & Description
*Cn
*Dn
100 AT Command Set Summaries
&X1 Terminal provides synchronous
transmit clock signal (External clock
from pin 24 of EIA-232D)
&X2 Received carrier provides
synchronous transmit clock signal
(Remote or Slave clock to pin 15 of
EIA-232D)
Break handling. Destructive Break
clears the buffer. Expedited Break is
sent immediately to the remote
system. (For internal modem only.)
&Y0 Destructive, expedited.
&Y1 * Nondestructive, expedited.
&Y2 Nondestructive, unexpedited.
Display all the phone numbers stored
in non-volatile RAM.
n=0-49 Write phone number/s to NVRAM at
location n (n=0-49) use AT*Dn or
ATS29=n to set the default dial
pointer.
Character length, including start, stop
and parity bit.
*C0 * 10-bit character length.
*C1 11-bit character length.
*C2 9-bit character length.
*C3 8-bit character length.
n=0-49 Set default dial pointer at telephone
Ref.
S28.2-3
Ref.
S15.3-4
S29