Description Of Ati3 Output - ZyXEL Communications omni TA128 User Manual

Command Options Function & Description
Sr=n
Sr?
SPIDr=nnn
...
SPID0
SPID1
SPID?
UPX
Vn
V0
V1 *
Xn n=0-7
5 *
Zn n=0-4
Zn
Z4
$

Description of ATI3 Output:

The Link Status Report output appears as follows:
ZyXEL ISDN TA LINK STATUS REPORT
Set S-register 'r' to value 'n'. 'n'
must be a decimal number
between 0 and 255.
Display value stored in S-register
'r'.
User enters Service Profile ID
nnn... (SPID), for USA switches.
First SPID number.
Second SPID Number, if any.
Display the SPID setting(s).
Download firmware to the Flash
EPROM using Xmodem protocol.
Sets display type for Result
Codes.
Display result code in numeric
form. (See also S35.7 and the
result code table of 'ATXn').
Display result code in verbose
form.
Result code options, see the
Options Table.
Reset TA and set power-on
profile.
Reset TA and load user profile n
(0-3).
Reset TA and load factory
settings.
Basic command summary help.
Ref.
S23.6
S23.3-5
S15.5-7
121