Description Of Ati2 Output - ZyXEL Communications U-336S User Manual

Description of ATI2 Output:

The Link Status Report output appears as follows:
ZyXEL MODEMS LINK STATUS REPORT
Chars Sent
Octets Sent
Blocks Sent
Blocks Resent
Max Block Size
Link Duration
FRN Requested
FCS Errors
Xmitter Underrun 0 Receiver Overrun
Last Speed/Protocol 33600
Disconnect Reason
Data Type
Chars
Octets
Block
Output
Parameter
Chars Sent
0 Chars Received
0 Octets Received
0 Blocks Received
0 Max Outstanding
0 Retrains Requested 0
0 Retrains Granted
0 FRN Granted
0 Round Trip Delay
Local hang up
Description
Data received from or sent to DTE (PC).
(Formatted as 7,E,1 or 7,O,1 or 8,N,1 etc.)
Data received from or sent to remote modem
in error control mode. (Compressed if data
compression was enabled.)
Framed Octets. (Delimited by the unique bit
pattern "01111110" known as a flag.)
Output Value Description
Number of characters DTE has sent to
AT Command Set Summaries 91
0
0
0
0
0
0
0
0