Number Plate Lamp; Load Compartment Lamp - HOLDEN TM BARINA Owner's Handbook Manual

Number plate lamp

1. Prise the lamp out with a
screwdriver.
2. Remove the bulb housing by
pulling downwards.
Do not pull on the cable.
3. Rotate the bulb holder
anticlockwise to disengage.
4. Remove the bulb from the holder.
5. Insert a new bulb.
6. Insert the bulb holder into
the bulb housing and rotate
clockwise.
7. Insert the bulb housing and
secure using a screwdriver.
8. Check lamp operation.
Vehicle care
Interior lamps

Load compartment lamp

1. Using a flat-blade screwdriver,
prise the lamp assembly
outwards.
221