212
Vehicle care
If the cooling system is cold, the
coolant level should be above the
line on the coolant reservoir.
Adding coolant
Caution
If the coolant level is too low,
engine damage may occur.
Do not spill coolant on the
vehicle's exterior surfaces as it
can damage the paintwork. If you
do, wash it off immediately.
Note
Use only approved coolant. See
Recommended fluids, lubricants and
parts on page 249.
1. Turn the ignition off.
2. Remove the coolant reservoir cap.
3. Add the required amount of
coolant.
4. Replace the cap securely.
If the coolant requires regular
topping up, contact a Holden
Dealer.
Warning
Avoid repeated or prolonged
contact with coolant.
Wash off with soap and water.
Keep out of reach of children.
Power steering fluid
Adding power steering fluid
The hydraulic power steering fluid
level must be between the MIN and
the MAX marks.
Use only Holden specified power
steering fluid. See Recommended
fluids, lubricants and parts on
page 249.