HOLDEN TM BARINA Owner's Handbook Manual page 116

114 Infotainment system
4. Press MENU•TUNE (14).
If there already is a Bluetooth
device connected to the
infotainment system:
Bluetooth is busy is displayed.
Connection standby is
displayed with a message and a
security code.
The initial value is 0000. This can
be changed:
1. Select Settings.
2. Select Bluetooth settings.
3. Select Bluetooth.
4. Change Bluetooth
The infotainment system can be
found by searching on the to be
®
connected Bluetooth
1. Select MY CAR on your device.
2. Enter the security code for the
infotainment system through the
Bluetooth
If the pairing of the device to
be connected is successful,
the screen will display the
information for the Bluetooth
device.
® code.
The infotainment system can register
up to five Bluetooth
®
device.
®
device if required.
®
® devices.
Connecting a Bluetooth
device
®
1. The Bluetooth device to be
connected from the Bluetooth
setup menu, must previously
have been paired with the
infotainment system.
Note
If there is a Bluetooth ®
already connected, that device
needs to be disconnected first.
2. Press CONFIG (12).
®
®
device