206
Vehicle care
4. Pull up the support rod away
from the holder.
5. Secure on the driver side of the
bonnet.
Closing
Warning
To avoid injury and/or damage
to the vehicle, check each time,
before the bonnet is closed, that
the contact area is unobstructed.
1. Place the support rod into the
holder.
2. Lower the bonnet and allow it to
drop into the catch.
3. Check that the bonnet is
engaged.
Warning
If while driving you notice that
the bonnet has not been properly
closed, pull the vehicle over to
the side of the road at the earliest
possible moment and close the
bonnet correctly.
Note
Do not pull down on the bonnet when
the bonnet is supported by the rod.