To Fold The Rear Seatbacks Down; To Return The Seatback To The Upright Position; Seat Belts - HOLDEN TM BARINA Owner's Handbook Manual

Hide thumbs Also See for TM BARINA:
Table of Contents

Advertisement

To fold the rear seatbacks down:

1. Unbuckle the seat belts.
2. Push the head restraints down
by pressing the locking button.
3. Slide the front seat forwards.
4. Adjust the front seatback to an
upright position.
5. Pull the release lever on top
of the rear seatback and fold it
forwards and down.
6. Place the seat belts into the belt
guides.
To return the seatback to the upright
position:
1. Pull the seat belt away from the
belt guides.
2. Lift the seatback upwards and
push firmly back into place.
Note
Ensure the seat belts are
clear of the latch.
The centre rear seat belt
may lock when raising the
seatback. Let the belt retract
then extend it.
Seats, restraints

Seat belts

Warning
Seat belts are designed to bear
upon the bony structure of the
body, and should be worn low
across the front of the pelvis or
the pelvis, chest and shoulders,
as applicable; wearing the lap
section of the belt across the
abdominal area must be avoided.
Seat belts should be adjusted as
firmly as possible, consistent with
comfort, to provide the protection
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm barinaTj trax 2016

Table of Contents