Adding Engine Oil; Engine Oil Change Intervals - HOLDEN TM BARINA Owner's Handbook Manual

Hide thumbs Also See for TM BARINA:
Table of Contents

Advertisement

210
Vehicle care

Adding engine oil

See Capacities on 254.
The engine oil filler cap is located on
the top of the engine.
1. Rotate the engine oil filler cap
anticlockwise and remove.
2. Add enough oil to reach below
the MAX mark on the dipstick.
3. Check the level on the dipstick
and add further oil if necessary.
The engine oil must not exceed
the MAX mark on the dipstick.
Caution
Overfilled engine oil must be
drained or suctioned out.
4. Replace the engine oil filler
cap tightly by rotating clockwise.
Note
Non-detergent and other low quality
oils, the use of break-in oil, tune
up compounds, friction reducing
compounds and other supplemental
additives are not recommended.
Danger
Engine oil is an irritant and if
ingested, can cause illness or
death.
Keep out of reach of children.
Avoid repeated or prolonged
contact with skin.
Wash exposed areas with soap
and water or hand cleaner.
Be careful when draining the
engine oil as it may be hot.

Engine oil change intervals

Refer to the Service/Warranty
Booklet and see Engine oil life
system on page 248.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tm barinaTj trax 2016

Table of Contents