Instrument Panel Fuse Box; Auxiliary Fuse Box; To Remove The Cover - HOLDEN TM BARINA Owner's Handbook Manual

224 Vehicle care
F21 ECM 1 ........................... (10A)
F22 COIL .............................. (10A)
F23 ECM 4 ........................... (10A)
F24 ECM 3 ........................... (10A)
F25 ECM 2 ........................... (20A)
F26 INJECTOR/IG COIL ..... (15A)
F27 ECM .............................. (15A)
F28 AC CLUTCH ................. (10A)
F29 TCM .............................. (15A)
F30 HORN ........................... (15A)
F31 FRT FOG ...................... (10A)
F32 HIGH BEAM LH ........... (10A)
F33 HIGH BEAM RH ........... (10A)
FU1 ABS PUMP ................... (40A)
FU2 FRT WIPER .................. (30A)
FU3 BLOWER ...................... (40A)
FU4 RUN/CRANK IEC ......... (30A)
FU5 SPARE .......................... (30A)
FU6 COOL FAN K5 .............. (40A)
FU7 COOL FAN K4 .............. (30A)
FU8 EVP ............................... (20A)
FU9 START .......................... (25A)
Relays
R1 FRT WIPER CONT
R2 FRT WIPER SPEED
R3 RR DEFOG
R4 RUN/CRANK
R5 SPARE
R6 FUEL PUMP
R8 COOL FAN K3
R9 P/T
R10 START
R11 AC CLUTCH
R12 HIGH BEAM
R13 COOL FAN K1

Auxiliary fuse box

(1.4 L)
The fuse box is located in the engine
compartment next to the engine
coolant reservoir.
Relays
R1 COOL FAN K3
R2 COOL FAN K7
Instrument panel
fuse box
The interior fuse box is located in the
glove box.

To remove the cover:

1. Open the glove box.
2. Pull up on the lower edge of the
cover.
To replace the cover:
1. Insert the cover at the upper
edge.
2. Push in at the lower edge to
secure.