Table of Contents
Advertisement
232
Vehicle care
13. Press the switch on the
compressor to I.
The tyre fills with sealant.
The compressor pressure gauge
briefly indicates up to 6 bar while
the sealant bottle is emptying
(approx. 30 seconds).
The pressure starts to drop.
Once the sealant is pumped into
the tyre, the tyre is inflated.
The prescribed tyre pressure
(approximately 2.4 bar) should
be obtained within 10 minutes.
14. When the correct pressure
is obtained, switch off the
compressor.
Warning
Do not over inflate tyres due
to risk of injury or damage to
the tyre.
15. If the tyre pressure is not
obtained within 10 minutes,
remove the tyre repair kit.
16. Move the vehicle one tyre
rotation.
17. Reattach the tyre repair kit and
continue the filling procedure for
10 minutes.
Warning
If the recommended pressure
cannot be reached after
approximately 10 minutes, the
vehicle should not be driven. The
tyre is too severely damaged and
the tyre repair kit cannot inflate
the tyre. Disconnect and stow the
tyre repair kit back in its original
position. Contact a Holden
Dealer.
18. Drain excess tyre pressure with
the button over the pressure
indicator.
Do not run the compressor
longer than 10 minutes.
19. Detach the tyre repair kit.
20. Push the catch on the bracket to
remove the sealant bottle from
the bracket.
Hide quick links:
Advertisement
Table of Contents
