Electrical System; Fuses; Fuse Extractor - HOLDEN TM BARINA Owner's Handbook Manual

222 Vehicle care
2. Remove the bulb.
3. Insert a new bulb.
4. Replace the lamp assembly
firmly into place.
5. Check lamp operation.

Electrical system

Fuses

Warning
Turn off the ignition (LOCK
position) and any electrical
equipment before changing
a fuse.
• Replace blown fuses promptly.
• A blown fuse can be recognised
by its melted wire.
• Do not replace the fuse until
the cause of the fault has been
remedied.
• Some functions are protected by
several fuses.

Fuse extractor

A fuse extractor is located in the fuse
box in the engine compartment.
Place the fuse extractor on the top or
side of the fuse to extract the fuse.
Replace the fuse cover securely
after use.
Warning
When replacing a fuse be sure
to use a fuse of the specified
amperage.
Never install a wire or similar
as it could damage electrical
components and cause a fire.
Any improper alterations to the
electrical system may cause a
fire hazard and engine damage.
To maintain your own safety and
that of the vehicle, have any work
involving the electrical system or
the replacement of high current
fuses or relays carried out by a
Holden Dealer.