HOLDEN TM BARINA Owner's Handbook Manual page 184

182 Driving and operating
Starting the engine
1. Apply the park brake.
2. Turn the key to position 1 while
moving the steering wheel
slightly to release the lock.
Manual transmission: Push the
clutch pedal to the floor and
move the shift lever to the
neutral position.
Automatic transmission: Move
the shift lever to P or N.
Do not accelerate.
3. Turn the key to position 3.
4. Release the key when the engine
is running.
Before restarting or to switch
the engine off, turn key back to
position 0.
Caution
Do not keep the key in position 3
for more than 10 seconds.
If the engine does not start, wait
10 seconds before trying again.
Parking
1. Apply the park brake.
2. Automatic transmission: Select
position P.
Manual transmission: If facing
uphill or on flat ground, select
1st gear. If facing downhill, select
reverse gear.
On an uphill slope, turn the front
wheels away from the kerb.
On a downhill slope, turn the
front wheels towards the kerb.
3. Shut all windows.
4. Turn the ignition off and remove
the key.
5. Press e on the key to lock all
doors. See Keys and locks on
page 16.