Automated Pump Stand Valves - USC PS10 Operator's Manual

PUMP STANDS PS10
PUMP STAND VALVES
SEED TREATMENT SOURCE VALVE:
This valve controls where the pump is
drawing liquid from. It allows liquid to be pulled from either the bottom of the mix tank
or the calibration tube. This valve is only present when a Calibration tube is mounted
on the pump stand.
Drawing chemical from the bottom of Drawing chemical from the bottom of
the Mix Tank the Calibration Tube
MANUAL SEED TREATMENT RETURN VALVE:
The bottom valve directs the liquid
to the top valve or to the seed treater. The top valve directs the liquid coming from the
mix tank or calibration tube or back to the calibration tube or mix tank for re-circulation.
Page 18