USC PS10 Operator's Manual page 24

16. Profile Editing Screen Navigation Button: This button will open a pop-up with
additional navigation buttons for the Chemical Editing, Pump Stand Editing, and
Import / Export screens. We will give additional information for this pop-up on page
37. This pop-up can only be accessed by an Operator or Admin user.
17. Alarms Screen Navigation Button: This button will take the operator to the
Alarms screen. When an alarm is present the button will flash between red and
grey.
18. Messages Screen Navigation Button: This button will take the operator to the
Messages screen. When a message is present the button will flash between yellow
and grey.
19. Setup and Options Screen Navigation Button: This button will take the operator
to the Setup and Options screen. This screen can only be accessed by an Admin
user.
20. Setpoints Screen Navigation Button: This button will take the operator to the
Setpoints screen. This screen can only be accessed by a USC Dealer login.
21. Splash Screen Navigation Button: This button will take the operator to the
Splash screen.
1. Target Rate (Direct Translate): While direct translate is enabled the entry shown
will be the entry from the Utilities page. This option is also enabled on the utilities
page. When this mode is enabled, the pump runs to a target flow rate in oz/min or mL/
min depending on whether metric mode is enabled. This option is independent of seed
or treater settings.
Page 24
PUMP STANDS PS10
Main Screen (Alternates)
1