Select List Pop-Up - USC PS10 Operator's Manual

1
2
The Select List Pop-Up is accessible from the multiple screens of the PS10 program. It
is available from the pump rate popup and chemical editing, alarms, and messages.
1. Search Bar: Allows the operator to type in parameters they wish to search by.
Once the operator presses the enter key, the list will update and place the selection
bar at the closest record to what was entered in the search bar.
2. Selection List: There are 6 selection items that can be selected from the selection
list. Each item will display which profile will be loaded when the selection is made.
The green highlight on the bar shows the currently selected item from the list.
3. Close Button: This button closes the pop-up and returns the operator to the
previous screen.
4. Home Button: Selecting the selection list to the first record of the profile.
5. Page Up Button: This button moves the display list up one full page. With the
page being 6 elements, pressing this button will move the list up 6 elements on the
profile list.
6. Up Button: This button moves the display list up one entry.
7. Down Button: This button moves the display list down one entry.
8. Page Down Button: This button moves the display list down one full page. With
the page being 6 elements, pressing this button will move the list down 6 elements
on the profile list.
9. End Button: Selecting the selection list to the last record in the profile list.
PUMP STANDS PS10

Select List Pop-Up

3
4
5
6
7
8
9
Page 27