USC PS10 Operator's Manual page 10

1. Review the operator's manual and all safety items before
working with, maintaining or operating the equipment .
2. Place all controls in neutral or off, stop motors, disable power
source, and wait for all moving parts to stop before servicing,
adjusting, repairing or unplugging.
3. Follow good shop practices:
Keep service area clean and dry.
Be sure electrical outlets and tools are properly grounded.
Use adequate light for the job at hand.
4. Keep hands, feet, hair and clothing away from all moving and/or rotating parts.
5. Clear the area of bystanders, especially children, when carrying out any
maintenance and repairs or making any adjustments.
6. Before resuming work, install and secure all guards when maintenance work is
completed.
7. Keep safety labels clean. Replace any sign that is damaged or not clearly visible.
1. Keep safety labels clean and legible at all times.
2. Replace safety labels that are missing or have become illegible.
3. Replaced parts that displayed a safety label should also display the current label.
4. Replacement safety labels are available. Contact your local authorized dealer.
How to Install Safety Labels:
Be sure that the installation area is clean and dry.
•
Be sure temperature is above 50
•
Decide on the exact position before you remove the backing paper.
•
Remove the smallest portion of the split backing paper.
•
Page 10
PUMP STANDS PS10
MAINTENANCE SAFETY
SAFETY LABELS
o o
F (10 C).