Setup & Options Screen - USC PS10 Operator's Manual

6. Total Errors: Number of active errors that still need to be resolved.
7. Clear Non-Active: Clears acknowledged messages off of the active list. These
messages then become archived and can be viewed again by selecting the View
All button.
8. View All: Toggles between view all and hide all. Hide all will only show active
messages and hide the inactive messages. View all shows all messages that have
occurred on the system. Shows active and archived messages.
9. Reset: Resets any Alarmed or Silenced messages. These messages then go to a
acknowledged state. If the condition of the message still exist, a new message
entry will appear.
10. Errors Resolved: Shows the total number of resolved or non-active errors.
11. Viewing: Shows what messages of the list we are viewing. It will show the starting
position of the list followed by the ending position of the list out of how many items
are possible in the list.
1. Simulation Mode Button: Turns on simulation of the pump stand panel. In
simulation the pump will not start and the inputs will be simulated.
2. Standard/Metric: Opens the Standard / Metric pop-up.
3. Calibrate Touch: Allows the operator to re-calibrate the touch screen on the pump
stand controller.
PUMP STANDS PS10
Messages Screen
Setup & Options Screen
1
2
3
Page 45