Pump Editing Screen - USC PS10 Operator's Manual

8. Density: This field is only visible when the pump is configured as a LIW pump. This
is where the operator may enter the density of the chemical they will outfit the pump
with. The density aids the LIW pump calculate how many fl. oz. or ml. the pump has
processed.
9. Clear Button: Selecting this button clears the currently selected profile to a blank
default record.
1
2
3
4
5
1. LIW Option: Selecting this option toggles the pump stand type between LIW and
Flow Meter Type pump.
2. Scale Tracking: Selecting this option toggles on or off the scale tracking features.
Scale tracking allows for the setting of "Pump Alarm Weight" and "Pump Warning
Weight" which sets the alarm weight and message weight respectively.
3. Flow Meter Device Type: The flow meter type selection is only visible when a flow
meter pump is configured (LIW Option disabled). By selecting this field a drop down
list will appear allowing the operator to select from SM6000, 80E08, SM6001, and
Custom flow meters.
4. Pump Head Quantity: This field allows the operator or dealer to configure how
many pump heads the pump stand has been outfitted with. This helps the program
determine how aggressively to run the pump.
5. Pump Start Delay Time: This field allows the operator to delay the starting of the
pump when in auto and the auxiliary signal is active. This allows for more precise
timing of the chemical application at the start of an automated run.
6. Pump Polarity: Selection this option toggles the pumps motor direction.
PUMP STANDS PS10
Pump Stand Editing Screen
6
7
8
9
10
Page 39