USC PS10 Operator's Manual page 23

6. Weight/SCU: Displays the Treater's seed weight per unit. This will be based off of
the Seed Per Pound (or Kilogram) and Seed Per Unit entered on the Utilities page.
This gives you the weight in every unit (calculated by Seed/Unit / Seed/lb).
7. Chemical Selected / Motor Status: The grey box on the top of the pump info
area, allows selection of what chemical is selected and displays the currently
selected chemical. By clicking this box, a new popup will appear to set what
chemical we are using and at what rate we are applying the chemical at. We will
discuss this pop-up further on page 26. In the upper right-hand corner of the pump
info box, we have a motor indicator. When the pump motor is running the circle will
be green and the text on the circle will display "on". When the pump motor is not
running, the circle will be red with the text "off".
8. Application Rate Details: In the square below the chemical name, we show our
current application rate. The application rates we show are oz/CWT (or oz/kg
depending on measurement mode) or oz/SCU. By clicking anywhere in the pump
info area we will open a new popup that allows chemical selection and application
rate selection that we will discuss on page 26.
9. Flow Rate Details: Below this box is our current pump flow rate. This will be in oz/
min (or mL/min depending on measurement mode). There is also a pump flow
indicator beside the current flow rate if we are using a LIW pump. This indicator will
be green when the pump detects flow is occurring and red when flow is not
occurring.
10. Auxiliary Status: The auxiliary status indicator displays whether we are detecting
an auxiliary signal or not. When the auxiliary signal is present, the indicator turns
green and the text changes to "on". When no auxiliary signal is detected the
indicator is red with the text "off".
11. Totalizer Display: This display shows the current accumulated oz (or mL in metric)
of the pump stand. To reset the totalizer, click on the display to return the total
amount to 0.
12. Start Batch Button: This button will start the Batch Mode operation manually. This
button is only visible if the Manual Batch Mode option is enabled.
13. Main Screen Navigation Button: This button will take the operator to the main
screen.
14. HOA Screen Navigation Button: This button will take the operator to the HOA
(Hands, Off, Auto) screen.
15. Utilities Screen Navigation Button: This button will take the operator to the
Utilities screen.
PUMP STANDS PS10
Main Screen
Page 23