USC PS10 Operator's Manual page 40

7. Custom PID Settings: This button opens the custom PID popup for use when
custom flow meter is selected from the "Flow Meter Device Type" selection. Here
we can enter customer PID settings to operate the pump with a customer
aggressiveness.
8. Flow Range Type: This selection allows the operator or dealer to configure which
flow range motor the pump has been outfitted with. The options are low flow, base
flow, and high flow.
9. Pump Stop Delay Time: This field allows the operator to delay the stopping of the
pump when in auto and the auxiliary signal is goes inactive. This allows for more
precise timing of the chemical application at the end of an automated run.
10. Save Button: The save button is used to save the current settings to the pump
stand.
1
1. Warning Weight: This entry is visible when scale tracking has been enabled. The
operator may enter a weight they wish to receive a warning at on a scale. A
warning will alert the operator when the chemical amount is getting low based off
scale weight, however will not shut down or prevent a run.
2. Alarm Weight: This entry is visible when scale tracking has been enabled. The
operator may enter a weight they wish to receive a alarm at on a scale. A alarm will
shut down the run when the chemical amount is too low based off scale weight.
Page 40
PUMP STANDS PS10
Pump Stand Editing Screen
Pump Stand Editing (Alternate)
2