Hoa Screen - USC PS10 Operator's Manual

1
2
3
4
5
1. Chemical Display: Displays the currently selected chemical on the pump.
2. Hand Button: Selecting the "Hand" button will put the motor into hand operation.
This is a non-automated operation to directly control the pump. The pump will run
at a rate/speed based off the selected information on the Utilities Page.
3. Off Button: Selecting the "Off" button will turn the motor off. This is a non-
automated operation to ensure the motor stays off.
4. Auto Button: Selecting the "Auto" button will put the motor into automatic state.
This is an automated operation of the motor. The pump in auto will turn on / off
based off the auxiliary signal and the pumps start and stop delays automatically.
The pump will run at the desired rate/speed based off the selected information on
the Utilities Page.
5. Motor Status: When the pump motor is running the circle will be green and the text
on the circle will display "on". When the pump motor is not running, the circle will be
red with the text "off".
6. Pump Calibration Button: Selecting the pump calibration button will open the
pump calibration pop-up. We will discuss the pop-up further on page 30.
7. Flow Rate Display: This display shows the current flow rate in oz/min (or mL/min
in metric) of the pump.
8. Totalizer Display: This display shows the current accumulated oz (or mL in metric)
of the pump stand. To reset the totalizer, click on the display to return the total
amount to 0.
Page 30
PUMP STANDS PS10

HOA Screen

6
7
8
9