Pump Rate Pop-Up - USC PS10 Operator's Manual

1
The Pump Rate Pop-Up is accessible from the main screen of the PS10 program.
1. Chemical Selection: Displays the currently selected chemical. By clicking this box,
a chemical selection list will appear showing all configured chemicals on the
system. Select the chemical to use for the pumps operation.
2. Application Rate Mode: Displays which application rate mode is currently
selected. The application rates are oz/CWT (if in metric oz/kg) or oz/SCU. By
selecting this box, the system will change which application rate mode the operator
is using. This mode is selection is applied at the corresponding application rate to
the left of this box.
3. Application Rate Entry: Displays currently selected application rate. By selecting
this box we can enter a new application rate in which we want to apply product by.
This rate will be applied by the corresponding application rate mode to the right of
the entry.
4. Save Button: Selecting this button will save the desired chemical, application rate,
and application entry to be used for automated runs.
5. Cancel / Exit Button: This button closes the pop-up and returns the operator to
the main screen.
Page 26
PUMP STANDS PS10

Pump Rate Pop-Up

4 5
2
3