Table of Contents
Advertisement
1
2
5
6
13
14
1. Date and Time: Displays the pump stand currently set Date and Time. By clicking
on the Date and Time the operator is taken to the Date and Time page where a
new Date and Time can be set.
2. Program Status: Displays the pump stands current status in the program. While
idle with no device operating in, the status will display "Main: Idle". When the pump
is running in auto, the status will update to "Main: Running".
3. Program Version: Displays the pump stands program version.
4. User Display: Displays the current user logged in. When the display is "User:
Default" nobody is logged into the system. When the operator has logged in the
display will change to "User: OPERATOR". Finally a system admin will be displayed
as "User: ADMIN". By clicking on this display, we will be navigated to the login
screen where we may enter our user name and password.
5. Treater Flow Rate: Displays the Treater's flow rate information entered on the
Utilities page. This is the flow rate the pump stand will assume the treater is
operating at. For the top field, flow rate is shown in lb/min or kg/min depending on
which measurement mode is selected. The second box shows the treaters rate in
SCU's / min.
Page 22
PUMP STANDS PS10
Main Screen
15
16
17
10
18
19
20
3
4
7
8
9
11
12
21
Advertisement
Table of Contents
