USC PS10 Operator's Manual page 53

6. Store flow meters in a location with the following conditions:
Ambient temperature of 50 to 80 degrees Fahrenheit.
•
Protection from direct sunlight to avoid unacceptable high surface temperatures.
•
Where moisture does not collect in or on the flow meter. This will help prevent
•
fungus or bacteria infestation which can damage the liner.
Store in a manner so that the inlet and outlet are as much in an up and down
•
position as possible.
1. Perform steps 1 through 10 on page 48 in the maintenance section to clean the
chemical residue from each individual pumps stand in the system.
If the pump stand(s) will be exposed to possible freezing
NOTICE
temperatures, the final flush of the system should be made with
a non freezable liquid like recreational vehicle antifreeze.
2. Open all drain points, valves, and filter to let as much of the water drain as possible.
3. Release pump heads and remove tubing to prevent any unnecessary wear
(see page 17).
PUMP STANDS PS10
PUMP STANDS WITH CHEMICAL TOTES
PUMPS - PLUMBING - LIW SCALES
Page 53