Section D; Electrical Operation - USC PS10 Operator's Manual

Section

Electrical Operation

D
This section provides a general overview and description of the operator controls for
the pump stands.
The pump stand control panels are plug connected enclosures that are located on
each pump stand frame. Each pump stand has two standard 120V plugs. One for the
manual ON/OFF switch controlling the mix tank motor (if equipped) and one for the
pump stand control panel.
Page 20
PUMP STANDS PS10
HIGH VOLTAGE ~ Always disconnect the power source before
working on or near the control panel or lead wires.
HIGH VOLTAGE ~ Use insulated tools when making adjustments
while the controls are under power.
AUTHORIZED PERSONNEL only shall work on the control panel.
Never allow anyone who has not read and familiarized
themselves with the owner's manual to open or work on the
control panels.
General Panel Descriptions