Advertisement
(4) Selecting the origin setting method
<MENU>
1.FILE/EDIT
2.RUN
3.PARAM.
4.ORIGIN/BRK
5.SET/INIT.
6.ENHANCED
123
<ORIGIN/BRAKE>
1.ORIGIN
2.BRAKE
123
<ORIGIN>
1.DATA
2.MECH
3.TOOL
4.ABS
5.USER
123
<ORIGIN> DATA
J1(
) J2(
J4(
) J5(
J7(
) J8(
123
◇◆◇ Selecting a menu ◇◆◇
The menu can be selected with one of the following methods.
A: Press the numeral key for the No. of the item to be selected.
B: Using the [ ↓ ] and [ ↑ ] keys, etc., move the cursor to the item to be selected, and then press the [INP] key.
◇◆◇ The input method of numeral ◇◆◇
The number can be inputted if the key displayed on the lower left of each key is pressed. Press the
[CHARACTER] key, and in the condition that "123" is displayed on the screen lower side, press the number key.
CLOSE
CLOSE
CLOSE
D:(■
)
) J3(
)
) J6(
)
)
CLOSE
1) Press the [4] key on the menu screen, and display the
ORIGIN/BRAKE screen.
2) Press the [1] key on the ORIGIN/BRAKE screen, and
display the origin setting method selection screen.
3) Press the [1] key on the origin setting method selection
screen, and select the data input method.
4) Display the origin data input screen
2Unpacking to Installation
Setting the origin 2-21
Advertisement
