Mitsubishi MELFA RH-3SDHR3515 Instruction Manual page 8

■ Introduction

Thank you for purchasing the Mitsubishi industrial robot.

This instruction manual explains the unpacking methods, installation, basic operation, maintenance and

inspection of the robot arm.

Always read through this manual before starting use to ensure correct usage of the robot.

The information contained in this document has been written to be accurate as much as possible. Please

interpret that items not described in this document "cannot be performed."

And, when maintenance and inspection of the robot, to access the arm and the base section is necessary.

Please prepare the environment which can access the robot with the stepladder etc. in RH-3SDHR.

The contents of this manual correspond to the following robot types.

<Type>

・ No part of this manual may be reproduced by any means or in any form, without prior consent from

Mitsubishi.

・ The details of this manual are subject to change without notice.

・ The information contained in this document has been written to be accurate as much as possible. 　

Please interpret that items not described in this document "cannot be performed." or "alarm may

occur".

Please contact your nearest dealer if you find any doubtful, wrong or skipped point.

･ This specifications is original.

・ RH-3SDHR3515 : General environment

・ RH-3SDHR3512C: Clean specification

・ RH-3SDHR3512W: Waterproof specification

Table of Contents

Melfa rh-3sdhr3512c Melfa rh-3sdhr3512w