Accessories For Assembly; Stem Protection Tube For Rising Valve Stem - AUMA SA 16.1 Operation Instructions Manual
Multi-turn actuators
Hide thumbs
Also See for SA 16.1:
- Operation instructions manual (72 pages) ,
- Operation & instruction manual (36 pages) ,
- Operation instructions manual (80 pages)
Table of Contents
Advertisement
SA 07.1
SA 16.1/SAR 07.1
4.4
Accessories for assembly
4.4.1
Stem protection tube for rising valve stem
SAR 16.1
— Option —
Figure 8:
Assembly of the stem protection tube
[1]
Cap for stem protection tube
[2]
Stem protection tube
[3]
Sealing ring
1.
Seal thread with hemp, Teflon tape, or thread sealing material.
2.
Screw stem protection tube [2] into thread and tighten it firmly.
3.
Push down the sealing ring [3] onto the housing.
4.
Check whether cap for stem protection tube [1] is available and in perfect con-
dition.
Assembly
13
Advertisement
Table of Contents
