Parts Names And Functions - GRAPHTEC CE LITE-50 Service Manual

2

PARTS NAMES and FUNCTIONS

Push roller
Media set lever - left
Media sensor
Front Guide
Roll media stocker
Operation panel ..................................Used to operate the device and configure various settings.
Media set lever - right .........................Used to fix (3 positions)/release the media by raising/lowering the
Media set lever-left .............................Used to fix/release the media by raising/lowering the push roller.
Push rollers ........................................Press the media to fix/move the media. Adjust the rollers position
Push roller positioning guide ...................Indicates the position of the push rollers.
Tool carriage .......................................Drives the tool left/right and scans registration marks or bar code.
Tool holder ..........................................Holds the tool and drives it up/down.
Media holding roller (movable) ...........Holds down media to prevent low cutting quality and malfunction of
Media sensor ......................................Scans media.
Front guide .........................................Sets the media at the position of the indicated marking.
Roll media stocker ..............................Holds roll media.
Power switch ......................................Used to turn the power ON/OFF.
USB memory-dedicated port: .............Used to connect a USB memory for loading data.
USB interface .....................................Used to connect the device to a computer.
Power supply connector .....................Used to connect the power cable.
Cutter groove ......................................Used when trimming off a roll paper with a cross cutter.
CE LITE-UM-251-9370
Media holding roller (movable)
Tool holder
Tool carriage
push roller. Adjust this lever position according to the width of the
media.
according to the type and size of the media.
registration mark detection. Set them in the center or the most lifted
part of the media.
2 PARTS NAMES and FUNCTIONS
Push roller positioning guide
Push roller
Media set lever - right
Operation panel
Power switch
USB memory-dedicated port
2-1
Cutter groove
Power supply connector
USB interface