Cutting Mat Base - GRAPHTEC CE LITE-50 Service Manual

6.2.25 Cutting Mat Base

How to detach the cutting mat base
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the cross cut base (See subsection 6.1.4.).
(4) Detach the bottom cover (See subsection 6.1.5.).
(5) Detach the rear guide (See subsection 6.1.7.).
(6) Loosen the two M3L6 binding head screws holding the main board bracket.
(7) Remove the four M3L6 self-tapping screws holding the cutting mat base to the frame.
(8) Disconnect the cables from the LED board L and LED board R.
CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
M3L6 self-tapping screws
LED board
6-56