GRAPHTEC CE LITE-50 Service Manual page 125

E04012
E04013
E04014
E04015
E04016
E04017
E04019
E04020
E04021
E04022
E04023
CE LITE-UM-251-9370
Exceeded detection area while
detecting the registration mark.
Exceeded detection area while
detecting the registration mark.
Exceeded detection area while
detecting the registration mark.
Exceeded detection area while
detecting the registration mark.
Exceeded detection area while
detecting the registration mark.
Exceeded detection area while
detecting the registration mark.
There was cancel operation by
the user.
There is a defect in the detection
settings value.
Registration mark was not
detected in the auto detection
area.
There was cancel operation by
the user.
Registration mark was not
detected.
9-7
9 TROUBLESHOOTING
Check the media.
Make sure the print position of
the registration mark.
Check the media.
Make sure the print position of
the registration mark.
Check the media.
Make sure the print position of
the registration mark.
Check the media.
Make sure the print position of
the registration mark.
Check the media.
Make sure the print position of
the registration mark.
Check the media.
Make sure the print position of
the registration mark.
Redo the process.
Check the settings value.
Check the media.
Make sure the print position of
the registration mark.
Redo the process.
Redo the sensor level
adjustment.
Change the color of the
registration mark.
Check the media.
Make sure the print position of
the registration mark.