GRAPHTEC CE LITE-50 Service Manual page 55

(3) Reattach the camshaft to the frame with its D-cut surface facing up, and then reattach the cam
lever to the camshaft.
Cam shaft L
(4) Tighten the three M3L6 binding head screws to hold the press cover L.
(5) Reattach the other parts in the reverse order in which they were detached.
(6) Route the cam board's cable through the hook and the cable clamper as shown in the picture
below.
CE LITE-UM-251-9370
D-cut surface up
Hook
Cable clamper
6-37
6 DISASSEMBLY AND REASSEMBLY
Cam lever lowered