Paper Sensor - GRAPHTEC CE LITE-50 Service Manual

6.2.3

Paper Sensor

How to detach the paper sensor
(1) Detach the right side cover (See subsection 6.1.1.).
(2) Detach the left side cover (See subsection 6.1.2.).
(3) Detach the cross cut base (See subsection 6.1.4.).
(4) Detach the bottom cover (See subsection 6.1.5.).
(5) Detach the front guide (See subsection 6.1.6.).
(6) Remove the M3L12 binding head screw holding the paper sensor, and then detach the paper
sensor.
(7) Disconnect the cable from the paper sensor.
How to reinstall the paper sensor
(1) Reattach the paper sensor in the reverse order in which it was detached.
CE LITE-UM-251-9370
6 DISASSEMBLY AND REASSEMBLY
M3L12 binding head screw
6-16